Inconel Alloy 601

Product Detail

Inconel 601 (UNS N06601/W.Nr.2.4851)
Chemical Composition Wt.%	%	Ni	Cr	Fe	C	Mn	Si	Cu	AL	P	S
	min	58	21						1
	max	63	25	bal	0.1	1.5	0.5	1	1.7	0.02	0.015
Physical Constants	Density.g/cm³			8.1 g/cm³
	Melting Range			1320-1370 ?
The minimum mechanical properties of the alloy at room temperature	Typical mechanical properties		tensile strength			Yield Strength		Elongation		HB
			Rm N/mm2			RP0.2N/mm2		A5 %
	Annealing treatment		650			300		30		-
	Solution treatment		600			240		30		220
Characters	1. High temperature oxidation resistance 2. Good anti-carbonization 3. can be very good oxidation resistance sulfur atmosphere 4. at room temperature and high temperature have good mechanical properties 5. Good Stress Corrosion Cracking Resistance The 601 has a high creep rupture strength due to its controlled carbon content and grain size and is therefore recommended for applications above 500 ?.
Microstr ycture	601 is a face-centered cubic lattice structure.
Applications	1. Heat treatment plant used trays, baskets and fixtures. 2. Wire sub-share annealing and radiant tubes, high-speed gas burners, industrial furnace in the mesh belt. 3. Ammonia reforming in the isolation tank and nitric acid in the manufacture of catalytic support grid. 4. Exhaust system components 5. Solid waste incinerator combustion chamber 6. Pipe support and soot handling components 7. Exhaust detoxification system components 8. Oxygen reheater